From the manufacturer

HDD Caddy for more storage with a 2nd laptop drive Thanks to HDD Caddy it is now easy to add more storage space to your laptop or Macbook Pro! With HDD Caddy you can add a second internal hard disk drive (HDD) or solid state drive (SSD) to your laptop. No need to carry external USB hard drives or USB sticks anymore! It is easy to install. First insert your own HDD or SSD in the HDD Caddy and then replace your optical drive (DVD or BluRay drive) with the HDD Caddy. HDD Caddy is an ideal solution if you need more storage space or if you want to use a fast SSD with an extra HDD. Enjoy the flexibility of having more storage space.   Install: Easy as 1 2 3! Installing the HDD Caddy into your laptop comes down to 3 basic steps. Remove the optical drive (or DVD-drive) Attach the bezel from the optical drive onto the HDD Caddy Install the HDD Caddy with 2nd HDD into the laptop (the empty spot of the optical drive) Model: N44 Color: Silver  Material: Aluminum alloy + plastic Supports 2.5" SATA I / II / III HDD / SSD up to 1TB Laptop connector: SATA Suitable for laptop with 9.5mm thickness optical drive   https://www.youtube.com/watch?v=hOjWHyCUrQU#t=61

     From the Manufacturer https://www.ekwb.com/shop/ek-supremacy-evo-amd-rgb-nickel   Technical specifications: - RGB cable length: 30cm - RGB connector classic 4-pin (12+ R G B) CPU socket compatibility: - AMD Socket AM4 - AMD Sockets: AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+

     From the Manufacturer https://www.ekwb.com/shop/ek-supremacy-evo-full-nickel   CPU socket compatibility: - Intel LGA-1150/1151/1155/1156 - Intel LGA-2011(-3) - Intel LGA-2066 Enclosed:  - EK-Supremacy EVO series water block  - EK-Supremacy EVO  PreciseMount  mounting mechanism - EK-Supremacy Backplate system (Intel LGA-115x Backplate; rubber gasket) - TIM / thermal grease: Thermal Grizzly Hydronaut (EKWB 1.0g)

From the manufacturer

From the manufacturer

     From the Manufacturer https://www.ekwb.com/shop/ek-fc-1080-gtx-ti-strix-nickel   Enclosed: - EK-FC1080 GTX Ti Strix water block  - Mounting mechanism with screw-in brass standoffs - Necessary mounting screws, nuts, and washers - 2x EK plug G1/4” - 6mm Allen key - Thermal pads - Thermal grease EK-TIM Ectotherm (1g)

Mfr Part Number:  BX80677I77740X Model:  Intel Core i7-7740X X-series Processor Core Name:  Kaby Lake Core Count:  4 Thread Count:  8 Clock Speed:  4.3 GHz Max Turbo Frequency:  4.5 GHz Cache:  8 MB DMI3:  8.0 GT/s Lithography:  14 nm Socket:  LGA 2066 Max Thermal Design Power:  112 W Memory Type:  DDR4-2666 Max CPU Configuration:  1 Advanced Technologies: Intel Optane Memory Supported Intel Turbo Boost 2.0 Technology Intel Hyper-Threading Technology Intel Virtualization Technology (VT-x) Intel Virtualization Technology for Directed I/O (VT-d) Intel 64 Instruction Set 64-bit Instruction Set Extensions SSE4.1/4.2, AVX 2.0 Intel AES New Instructions

     From the Manufacturer https://www.ekwb.com/shop/ek-uni-rad-holder-120   EK-UNI RAD Holder 120 provides various placements of radiator outside PC cases or any other surfaces suitable for mounting your favorite radiators.  This way users are allowed to take PC tuning one step further.  Holders come packed in a pair of two with mounting screws.  Made of steel (black painted).

     From the Manufacturer https://www.ekwb.com/shop/ek-fc-1080-gtx-ti-strix-nickel   Enclosed: - EK-FC1080 GTX Ti Strix Backplate - Nickel - Mounting mechanism - Thermal pads

     From the Manufacturer https://www.ekwb.com/shop/ek-supremacy-evo-rgb-nickel   Technical specifications: - RGB cable length: 30cm - RGB connector classic 4-pin (12+ R G B) CPU socket compatibility: - Intel LGA-1150/1151/1155/1156 - Intel LGA-2011(-3) - Intel LGA-2066

 LED Strip (with 200mm cable)    Dimension of LED part only     Extension cable    Number of LED lights 500mm  LED Strip (with 200mm cable):   Dimension of LED part only   Extension cable  Number of LED lights 500mm:  LxWxT: 300 x 10 x 3mm 500mm 18

The EK-RES X3 reservoir from EK CSQ design line is an improved version of renown EK-Multioption RES X2 reservoirs released three years ago. Compared to EK-Multioption RES X2 product line the EK-RES X3 reservoirs feature improved inlet/outlet port configuration for easier and more straightforward fitting configuration and tube routing. Improvements have been made on the reservoir's bottom terminal which has been optimized for best flow. Vortex ouccurance has also been diminished by the use of enclosed anti-cyclone as well as additional PE foam. All these new features result in easier-than-ever mounting, filling and quickest bleeding of air. Reservoir is manufactured of premium quality 60mm acrylic tube and POM Acetal end caps. The sealing is performed by quality EPDM rubber washers. New RES X3 comes with a pair of EK design reservoir holders using adjustable fastening force controlled by enclosed Allen key. Technical data: - Installation height: 250mm  - Diameter: 60mm  - Capacity: ~440ml  - Weight (netto): 370g  Enclosed:   - EK-Multioption RES X3 - Pair of EK reservoir holders with mounting screws - 2 × G1/4 extenders - 4 × G1/4 Plugs  - 1 × 6mm Allen key for plugs  - 1 × 2,5mm allen key for reservoir holders - 1 × polyether anti-cyclon foam

EK-CoolStream SE is a slim, high-performance computer liquid cooling radiator which combines EK's unique CSQ design with latest radiator core engine. Built for EK-Vardar 120mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation. EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream SE series radiators a perfect choice for any computer water cooled system. Overall compact measurement of the SE series radiator allow for utilization even in the tiniest computer chassis. This radiator offers best cooling capacity in 25mm thick radiator class: copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance. This product features two recessed G1/4 threaded ports with two pre-installed extenders to allow any G1/4 threaded fitting to be used. EK recommends EK-ACF series compression fittings. Technical details:  Material:  - Copper fins - 90% copper tubing (H90) - Brass chambers - Aluminum/Steel housing Dimensions: 280 x 120 x 28mm (L x W x H) Weight: 0.70kg Liquid Capacity: ~120mL FPI: 22 Port threads: 2x G1/4 Fan compatibility: any standard size 120x120x25mm fan; UNC 6-32 thread tapping Pressure tested: 1bar(g) Enclosed:  - EK-CoolStream SE series radiator /w two pre-installed G1/4 extenders - Flat-head UNC 6-32 screws (l=30mm) - Flat-head UNC 6-32 screws (l=5mm) - Allen key 2,5mm

EK-Velocity is the new high-performance flagship premium quality CPU water block for modern Intel processors. It features a fresh design that will enable a vast number of variations and options for enthusiasts and demanding users as well! EK® Velocity series CPU water blocks embed the 5th generation of the award-winning EK® CPU water block cooling engine, further tweaked for performance and optimal coolant flow! Low hydraulic flow restriction enables this product to be used in setups using weaker water pumps or lower pump speeds for added silent operation, while still achieving top performance! The water block also comes with the most sophisticated RGB lightning implementation on the market to this day. A total of 24 LEDs are housed under the aesthetic shroud which connects to a standard 3-pin 5V D-RGB header. The purest copper available on the market is used for the EK-Velocity cold plate which is precisely machined to a dense micro-fin structure. The contact surface itself is machine polished for a better contact with the CPU IHS. This version of the water block features a nickel-plated cold plate with a CNC machined glass like Acrylicl top piece. The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the interchangeable thick jet plate ensures the best contact surface for mainstream and HEDT Intel platforms. The block is equipped with a reinforced hold-down bracket, and the enclosed mounting kit includes all the necessary mounting screws, mounting springs, an Intel 115x backplate, rubber backplate gasket and a small tube of Thermal Grizzly Hydronaut high-performance thermal paste. The EK-Velocity CPU water block features a universal mounting mechanism that offers error-preventing, tool-less installation supporting Intel LGA-115x and LGA-20xx sockets out of the box. The mounting screws are streamlined and are even smaller than before for an added aesthetical perfection. This product is compatible with all popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the RGB header. Technical specifications: - RGB cable length: 30cm - RGB connector 3-pin 5V digital LED header (Pinout: +5V D G) CPU socket compatibility: - Intel LGA-1150/1151/1155/1156  - Intel LGA-2011(-3)  - Intel LGA-2066

Bring a unique style to your gaming setup! With the  Zeus ,  Xigmatek  revolutionizes the stylistic standards in case design by offering a quality product with futuristic and sharp lines. The main parts of this UFO are designed and assembled using state-of-the-art precision processes, allowing it to reveal its full potential. Under the bonnet, you have enough space for an ATX/M-ATX configuration with a 320mm graphics card, 160mm fan or 155mm power supply. With no less than 8 fan slots (5 RGB included), the Zeus provides optimal cooling for your components and can also be modified to accommodate a watercooling system. The semi-open design of this timeless case as well as the 3 tempered glass panels surrounding the interior space will offer you an unrestricted view of your machine and will not leave anyone indifferent! A CASE THAT BREAKS THE CODES Aggressive, atypical or even futuristic: there is no shortage of adjectives to describe the Zeus and its  unique silhouette .  The major parts are cut via precision CNC and NCT processes to the millimetre , creating a modern design with an  open chassis  adorned with  three  1.2mm thick  tempered glass panels  (front and both sides) that ideally showcase your internal components. In addition,  the five fans supplied all have RGB LEDs  that you can use to enhance the look of the Zeus or create your own custom atmosphere to suit your mood or game of the moment! STUNNING PERFORMANCE Despite its relatively low profile, the Zeus can rely on its ingenious internal structure to retain a large internal volume to accommodate a  graphics card up to 320mm , a  160mm fan  or a  power supply  up to  155mm .  8 fan slots are available : 3 x 120 mm on the front (included and RGB), 3 x 120 or 140 mm on the top (optional) and 2 x 120 mm on the back (included and RGB). This powerful cooling system efficiently removes the heat generated by your components and can be modified to use a  watercooling system  with a maximum height of 360 mm (front and top). For your data, you have the space to install 2 2.5" disks OR 1 3.5" disk in the modular bay. At the front connectivity, 2 USB-A 3.0 ports and the classic audio connectors are present for your everyday connections. MAIN FEATURES : Medium tower case for ATX/M-ATX motherboards Unique futuristic styling and  open case chassis design 3 tempered glass panels  (1.2mm thick) 5 pre-installed 120mm LED RGB fans (8 slots in total) Watercooling compatible (maximum 360mm radiator) 1 modular bay: 2 x 2.5" OR 1 x 3.5 Easy cable management External connections: 2 x USB-A 3.0 ports and standard audio ports Max. power supply length: 155 mm Maximum height of the cooling unit: 160 mm Max. length of graphics card: 320 mm Dimensions: 755 x 220 x 595 mm